block/UART:
  description: Universal Asynchronous Receiver/Transmitter.
  items:
  - name: TASKS_STARTRX
    description: Start UART receiver.
    byte_offset: 0
    access: Write
  - name: TASKS_STOPRX
    description: Stop UART receiver.
    byte_offset: 4
    access: Write
  - name: TASKS_STARTTX
    description: Start UART transmitter.
    byte_offset: 8
    access: Write
  - name: TASKS_STOPTX
    description: Stop UART transmitter.
    byte_offset: 12
    access: Write
  - name: TASKS_SUSPEND
    description: Suspend UART.
    byte_offset: 28
    access: Write
  - name: EVENTS_CTS
    description: CTS activated.
    byte_offset: 256
  - name: EVENTS_NCTS
    description: CTS deactivated.
    byte_offset: 260
  - name: EVENTS_RXDRDY
    description: Data received in RXD.
    byte_offset: 264
  - name: EVENTS_TXDRDY
    description: Data sent from TXD.
    byte_offset: 284
  - name: EVENTS_ERROR
    description: Error detected.
    byte_offset: 292
  - name: EVENTS_RXTO
    description: Receiver timeout.
    byte_offset: 324
  - name: SHORTS
    description: Shortcuts for UART.
    byte_offset: 512
    fieldset: SHORTS
  - name: INTENSET
    description: Interrupt enable set register.
    byte_offset: 772
    fieldset: INTENSET
  - name: INTENCLR
    description: Interrupt enable clear register.
    byte_offset: 776
    fieldset: INTENCLR
  - name: ERRORSRC
    description: Error source. Write error field to 1 to clear error.
    byte_offset: 1152
    fieldset: ERRORSRC
  - name: ENABLE
    description: Enable UART and acquire IOs.
    byte_offset: 1280
    fieldset: ENABLE
  - name: PSELRTS
    description: Pin select for RTS.
    byte_offset: 1288
  - name: PSELTXD
    description: Pin select for TXD.
    byte_offset: 1292
  - name: PSELCTS
    description: Pin select for CTS.
    byte_offset: 1296
  - name: PSELRXD
    description: Pin select for RXD.
    byte_offset: 1300
  - name: RXD
    description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working.
    byte_offset: 1304
    access: Read
    fieldset: RXD
  - name: TXD
    description: TXD register.
    byte_offset: 1308
    access: Write
    fieldset: TXD
  - name: BAUDRATE
    description: UART Baudrate.
    byte_offset: 1316
    fieldset: BAUDRATE
  - name: CONFIG
    description: Configuration of parity and hardware flow control register.
    byte_offset: 1388
    fieldset: CONFIG
  - name: POWER
    description: Peripheral power control.
    byte_offset: 4092
    fieldset: POWER
fieldset/BAUDRATE:
  description: UART Baudrate.
  fields:
  - name: BAUDRATE
    description: UART baudrate.
    bit_offset: 0
    bit_size: 32
    enum: BAUDRATE
fieldset/CONFIG:
  description: Configuration of parity and hardware flow control register.
  fields:
  - name: HWFC
    description: Hardware flow control.
    bit_offset: 0
    bit_size: 1
    enum: HWFC
  - name: PARITY
    description: Include parity bit.
    bit_offset: 1
    bit_size: 3
    enum: CONFIG_PARITY
fieldset/ENABLE:
  description: Enable UART and acquire IOs.
  fields:
  - name: ENABLE
    description: Enable or disable UART and acquire IOs.
    bit_offset: 0
    bit_size: 3
    enum: ENABLE
fieldset/ERRORSRC:
  description: Error source. Write error field to 1 to clear error.
  fields:
  - name: OVERRUN
    description: A start bit is received while the previous data still lies in RXD. (Data loss).
    bit_offset: 0
    bit_size: 1
    enum: OVERRUN
  - name: PARITY
    description: A character with bad parity is received. Only checked if HW parity control is enabled.
    bit_offset: 1
    bit_size: 1
    enum: ERRORSRC_PARITY
  - name: FRAMING
    description: A valid stop bit is not detected on the serial data input after all bits in a character have been received.
    bit_offset: 2
    bit_size: 1
    enum: FRAMING
  - name: BREAK
    description: The serial data input is '0' for longer than the length of a data frame.
    bit_offset: 3
    bit_size: 1
    enum: BREAK
fieldset/INTENCLR:
  description: Interrupt enable clear register.
  fields:
  - name: CTS
    description: Disable interrupt on CTS event.
    bit_offset: 0
    bit_size: 1
    enum: INTENCLR_CTS
  - name: NCTS
    description: Disable interrupt on NCTS event.
    bit_offset: 1
    bit_size: 1
    enum: INTENCLR_NCTS
  - name: RXDRDY
    description: Disable interrupt on RXRDY event.
    bit_offset: 2
    bit_size: 1
    enum: INTENCLR_RXDRDY
  - name: TXDRDY
    description: Disable interrupt on TXRDY event.
    bit_offset: 7
    bit_size: 1
    enum: INTENCLR_TXDRDY
  - name: ERROR
    description: Disable interrupt on ERROR event.
    bit_offset: 9
    bit_size: 1
    enum: INTENCLR_ERROR
  - name: RXTO
    description: Disable interrupt on RXTO event.
    bit_offset: 17
    bit_size: 1
    enum: INTENCLR_RXTO
fieldset/INTENSET:
  description: Interrupt enable set register.
  fields:
  - name: CTS
    description: Enable interrupt on CTS event.
    bit_offset: 0
    bit_size: 1
    enum: INTENSET_CTS
  - name: NCTS
    description: Enable interrupt on NCTS event.
    bit_offset: 1
    bit_size: 1
    enum: INTENSET_NCTS
  - name: RXDRDY
    description: Enable interrupt on RXRDY event.
    bit_offset: 2
    bit_size: 1
    enum: INTENSET_RXDRDY
  - name: TXDRDY
    description: Enable interrupt on TXRDY event.
    bit_offset: 7
    bit_size: 1
    enum: INTENSET_TXDRDY
  - name: ERROR
    description: Enable interrupt on ERROR event.
    bit_offset: 9
    bit_size: 1
    enum: INTENSET_ERROR
  - name: RXTO
    description: Enable interrupt on RXTO event.
    bit_offset: 17
    bit_size: 1
    enum: INTENSET_RXTO
fieldset/POWER:
  description: Peripheral power control.
  fields:
  - name: POWER
    description: Peripheral power control.
    bit_offset: 0
    bit_size: 1
    enum: POWER
fieldset/RXD:
  description: RXD register. On read action the buffer pointer is displaced. Once read the character is consumed. If read when no character available, the UART will stop working.
  fields:
  - name: RXD
    description: RX data from previous transfer. Double buffered.
    bit_offset: 0
    bit_size: 8
fieldset/SHORTS:
  description: Shortcuts for UART.
  fields:
  - name: CTS_STARTRX
    description: Shortcut between CTS event and STARTRX task.
    bit_offset: 3
    bit_size: 1
    enum: CTS_STARTRX
  - name: NCTS_STOPRX
    description: Shortcut between NCTS event and STOPRX task.
    bit_offset: 4
    bit_size: 1
    enum: NCTS_STOPRX
fieldset/TXD:
  description: TXD register.
  fields:
  - name: TXD
    description: TX data for transfer.
    bit_offset: 0
    bit_size: 8
enum/BAUDRATE:
  bit_size: 32
  variants:
  - name: Baud1200
    description: 1200 baud.
    value: 323584
  - name: Baud2400
    description: 2400 baud.
    value: 643072
  - name: Baud4800
    description: 4800 baud.
    value: 1290240
  - name: Baud9600
    description: 9600 baud.
    value: 2576384
  - name: Baud14400
    description: 14400 baud.
    value: 3866624
  - name: Baud19200
    description: 19200 baud.
    value: 5152768
  - name: Baud28800
    description: 28800 baud.
    value: 7729152
  - name: Baud31250
    description: 31250 baud.
    value: 8388608
  - name: Baud38400
    description: 38400 baud.
    value: 10309632
  - name: Baud56000
    description: 56000 baud.
    value: 15007744
  - name: Baud57600
    description: 57600 baud.
    value: 15462400
  - name: Baud76800
    description: 76800 baud.
    value: 20615168
  - name: Baud115200
    description: 115200 baud.
    value: 30924800
  - name: Baud230400
    description: 230400 baud.
    value: 61845504
  - name: Baud250000
    description: 250000 baud.
    value: 67108864
  - name: Baud460800
    description: 460800 baud.
    value: 123695104
  - name: Baud921600
    description: 921600 baud.
    value: 247386112
  - name: Baud1M
    description: 1M baud.
    value: 268435456
enum/BREAK:
  bit_size: 1
  variants:
  - name: NotPresent
    description: Error not present.
    value: 0
  - name: R_Present_W_Clear
    description: Error present.
    value: 1
enum/CONFIG_PARITY:
  bit_size: 3
  variants:
  - name: Excluded
    description: Parity bit excluded.
    value: 0
  - name: Included
    description: Parity bit included.
    value: 7
enum/CTS_STARTRX:
  bit_size: 1
  variants:
  - name: Disabled
    description: Shortcut disabled.
    value: 0
  - name: Enabled
    description: Shortcut enabled.
    value: 1
enum/ENABLE:
  bit_size: 3
  variants:
  - name: Disabled
    description: UART disabled.
    value: 0
  - name: Enabled
    description: UART enabled.
    value: 4
enum/ERRORSRC_PARITY:
  bit_size: 1
  variants:
  - name: NotPresent
    description: Error not present.
    value: 0
  - name: R_Present_W_Clear
    description: Error present.
    value: 1
enum/FRAMING:
  bit_size: 1
  variants:
  - name: NotPresent
    description: Error not present.
    value: 0
  - name: R_Present_W_Clear
    description: Error present.
    value: 1
enum/HWFC:
  bit_size: 1
  variants:
  - name: Disabled
    description: Hardware flow control disabled.
    value: 0
  - name: Enabled
    description: Hardware flow control enabled.
    value: 1
enum/INTENCLR_CTS:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENCLR_ERROR:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENCLR_NCTS:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENCLR_RXDRDY:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENCLR_RXTO:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENCLR_TXDRDY:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Clear
    description: Interrupt enabled.
    value: 1
enum/INTENSET_CTS:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/INTENSET_ERROR:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/INTENSET_NCTS:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/INTENSET_RXDRDY:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/INTENSET_RXTO:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/INTENSET_TXDRDY:
  bit_size: 1
  variants:
  - name: Disabled
    description: Interrupt disabled.
    value: 0
  - name: R_Enabled_W_Set
    description: Interrupt enabled.
    value: 1
enum/NCTS_STOPRX:
  bit_size: 1
  variants:
  - name: Disabled
    description: Shortcut disabled.
    value: 0
  - name: Enabled
    description: Shortcut enabled.
    value: 1
enum/OVERRUN:
  bit_size: 1
  variants:
  - name: NotPresent
    description: Error not present.
    value: 0
  - name: R_Present_W_Clear
    description: Error present.
    value: 1
enum/POWER:
  bit_size: 1
  variants:
  - name: Disabled
    description: Module power disabled.
    value: 0
  - name: Enabled
    description: Module power enabled.
    value: 1