block/ADC1:
  description: Analog to digital converter.
  items:
  - name: SR
    description: status register.
    byte_offset: 0
    fieldset: SR
  - name: CR1
    description: control register 1.
    byte_offset: 4
    fieldset: CR1
  - name: CR2
    description: control register 2.
    byte_offset: 8
    fieldset: CR2
  - name: SMPR1
    description: sample time register 1.
    byte_offset: 12
    fieldset: SMPR1
  - name: SMPR2
    description: sample time register 2.
    byte_offset: 16
    fieldset: SMPR2
  - name: JOFR
    description: injected channel data offset register %s.
    array:
      len: 4
      stride: 4
    byte_offset: 20
    fieldset: JOFR
  - name: HTR
    description: watchdog higher threshold register.
    byte_offset: 36
    fieldset: HTR
  - name: LTR
    description: watchdog lower threshold register.
    byte_offset: 40
    fieldset: LTR
  - name: SQR1
    description: regular sequence register 1.
    byte_offset: 44
    fieldset: SQR1
  - name: SQR2
    description: regular sequence register 2.
    byte_offset: 48
    fieldset: SQR2
  - name: SQR3
    description: regular sequence register 3.
    byte_offset: 52
    fieldset: SQR3
  - name: JSQR
    description: injected sequence register.
    byte_offset: 56
    fieldset: JSQR
  - name: JDR
    description: injected data register x.
    array:
      len: 4
      stride: 4
    byte_offset: 60
    access: Read
    fieldset: JDR
  - name: DR
    description: regular data register.
    byte_offset: 76
    access: Read
    fieldset: DR
fieldset/CR1:
  description: control register 1.
  fields:
  - name: AWDCH
    description: Analog watchdog channel select bits.
    bit_offset: 0
    bit_size: 5
  - name: EOCIE
    description: Interrupt enable for EOC.
    bit_offset: 5
    bit_size: 1
    enum: EOCIE
  - name: AWDIE
    description: Analog watchdog interrupt enable.
    bit_offset: 6
    bit_size: 1
    enum: AWDIE
  - name: JEOCIE
    description: Interrupt enable for injected channels.
    bit_offset: 7
    bit_size: 1
    enum: JEOCIE
  - name: SCAN
    description: Scan mode.
    bit_offset: 8
    bit_size: 1
    enum: SCAN
  - name: AWDSGL
    description: Enable the watchdog on a single channel in scan mode.
    bit_offset: 9
    bit_size: 1
    enum: AWDSGL
  - name: JAUTO
    description: Automatic injected group conversion.
    bit_offset: 10
    bit_size: 1
    enum: JAUTO
  - name: DISCEN
    description: Discontinuous mode on regular channels.
    bit_offset: 11
    bit_size: 1
    enum: DISCEN
  - name: JDISCEN
    description: Discontinuous mode on injected channels.
    bit_offset: 12
    bit_size: 1
    enum: JDISCEN
  - name: DISCNUM
    description: Discontinuous mode channel count.
    bit_offset: 13
    bit_size: 3
  - name: DUALMOD
    description: Dual mode selection.
    bit_offset: 16
    bit_size: 4
    enum: DUALMOD
  - name: JAWDEN
    description: Analog watchdog enable on injected channels.
    bit_offset: 22
    bit_size: 1
    enum: JAWDEN
  - name: AWDEN
    description: Analog watchdog enable on regular channels.
    bit_offset: 23
    bit_size: 1
    enum: AWDEN
fieldset/CR2:
  description: control register 2.
  fields:
  - name: ADON
    description: A/D converter ON / OFF.
    bit_offset: 0
    bit_size: 1
    enum: ADON
  - name: CONT
    description: Continuous conversion.
    bit_offset: 1
    bit_size: 1
    enum: CONT
  - name: CAL
    description: A/D calibration.
    bit_offset: 2
    bit_size: 1
    enum: CAL
  - name: RSTCAL
    description: Reset calibration.
    bit_offset: 3
    bit_size: 1
    enum: RSTCAL
  - name: DMA
    description: Direct memory access mode.
    bit_offset: 8
    bit_size: 1
    enum: DMA
  - name: ALIGN
    description: Data alignment.
    bit_offset: 11
    bit_size: 1
    enum: ALIGN
  - name: JEXTSEL
    description: External event select for injected group.
    bit_offset: 12
    bit_size: 3
    enum: JEXTSEL
  - name: JEXTTRIG
    description: External trigger conversion mode for injected channels.
    bit_offset: 15
    bit_size: 1
    enum: JEXTTRIG
  - name: EXTSEL
    description: External event select for regular group.
    bit_offset: 17
    bit_size: 3
    enum: EXTSEL
  - name: EXTTRIG
    description: External trigger conversion mode for regular channels.
    bit_offset: 20
    bit_size: 1
    enum: EXTTRIG
  - name: JSWSTART
    description: Start conversion of injected channels.
    bit_offset: 21
    bit_size: 1
    enum: JSWSTART
  - name: SWSTART
    description: Start conversion of regular channels.
    bit_offset: 22
    bit_size: 1
    enum: SWSTART
  - name: TSVREFE
    description: Temperature sensor and VREFINT enable.
    bit_offset: 23
    bit_size: 1
    enum: TSVREFE
fieldset/DR:
  description: regular data register.
  fields:
  - name: DATA
    description: Regular data.
    bit_offset: 0
    bit_size: 16
  - name: ADC2DATA
    description: ADC2 data.
    bit_offset: 16
    bit_size: 16
fieldset/HTR:
  description: watchdog higher threshold register.
  fields:
  - name: HT
    description: Analog watchdog higher threshold.
    bit_offset: 0
    bit_size: 12
fieldset/JDR:
  description: injected data register x.
  fields:
  - name: JDATA
    description: Injected data.
    bit_offset: 0
    bit_size: 16
fieldset/JOFR:
  description: injected channel data offset register %s.
  fields:
  - name: JOFFSET
    description: Data offset for injected channel.
    bit_offset: 0
    bit_size: 12
fieldset/JSQR:
  description: injected sequence register.
  fields:
  - name: JSQ
    description: '%s conversion in injected sequence.'
    bit_offset: 0
    bit_size: 5
    array:
      len: 4
      stride: 5
  - name: JL
    description: Injected sequence length.
    bit_offset: 20
    bit_size: 2
fieldset/LTR:
  description: watchdog lower threshold register.
  fields:
  - name: LT
    description: Analog watchdog lower threshold.
    bit_offset: 0
    bit_size: 12
fieldset/SMPR1:
  description: sample time register 1.
  fields:
  - name: SMP
    description: Channel %s sample time selection.
    bit_offset: 0
    bit_size: 3
    array:
      len: 8
      stride: 3
    enum: SMP
fieldset/SMPR2:
  description: sample time register 2.
  fields: []
fieldset/SQR1:
  description: regular sequence register 1.
  fields:
  - name: SQ
    description: '%s conversion in regular sequence.'
    bit_offset: 0
    bit_size: 5
    array:
      len: 4
      stride: 5
  - name: L
    description: Regular channel sequence length.
    bit_offset: 20
    bit_size: 4
fieldset/SQR2:
  description: regular sequence register 2.
  fields: []
fieldset/SQR3:
  description: regular sequence register 3.
  fields: []
fieldset/SR:
  description: status register.
  fields:
  - name: AWD
    description: Analog watchdog flag.
    bit_offset: 0
    bit_size: 1
    enum: AWD
  - name: EOC
    description: Regular channel end of conversion.
    bit_offset: 1
    bit_size: 1
    enum: EOC
  - name: JEOC
    description: Injected channel end of conversion.
    bit_offset: 2
    bit_size: 1
    enum: JEOC
  - name: JSTRT
    description: Injected channel start flag.
    bit_offset: 3
    bit_size: 1
    enum: JSTRT
  - name: STRT
    description: Regular channel start flag.
    bit_offset: 4
    bit_size: 1
    enum: STRT
enum/ADON:
  bit_size: 1
  variants:
  - name: Disabled
    description: Disable ADC conversion/calibration and go to power down mode.
    value: 0
  - name: Enabled
    description: Enable ADC and to start conversion.
    value: 1
enum/ALIGN:
  bit_size: 1
  variants:
  - name: Right
    description: Right Alignment.
    value: 0
  - name: Left
    description: Left Alignment.
    value: 1
enum/AWD:
  bit_size: 1
  variants:
  - name: R_NoEvent_W_Clear
    description: No analog watchdog event occurred.
    value: 0
  - name: Event
    description: Analog watchdog event occurred.
    value: 1
enum/AWDEN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Analog watchdog disabled on regular channels.
    value: 0
  - name: Enabled
    description: Analog watchdog enabled on regular channels.
    value: 1
enum/AWDIE:
  bit_size: 1
  variants:
  - name: Disabled
    description: Analog watchdog interrupt disabled.
    value: 0
  - name: Enabled
    description: Analog watchdog interrupt enabled.
    value: 1
enum/AWDSGL:
  bit_size: 1
  variants:
  - name: All
    description: Analog watchdog enabled on all channels.
    value: 0
  - name: Single
    description: Analog watchdog enabled on a single channel.
    value: 1
enum/CAL:
  bit_size: 1
  variants:
  - name: Complete
    description: Calibration completed.
    value: 0
  - name: R_NotComplete_W_Start
    description: Calibrating.
    value: 1
enum/CONT:
  bit_size: 1
  variants:
  - name: Single
    description: Single conversion mode.
    value: 0
  - name: Continuous
    description: Continuous conversion mode.
    value: 1
enum/DISCEN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Discontinuous mode on regular channels disabled.
    value: 0
  - name: Enabled
    description: Discontinuous mode on regular channels enabled.
    value: 1
enum/DMA:
  bit_size: 1
  variants:
  - name: Disabled
    description: DMA mode disabled.
    value: 0
  - name: Enabled
    description: DMA mode enabled.
    value: 1
enum/DUALMOD:
  bit_size: 4
  variants:
  - name: Independent
    description: Independent mode.
    value: 0
  - name: RegularInjected
    description: Combined regular simultaneous + injected simultaneous mode.
    value: 1
  - name: RegularAlternateTrigger
    description: Combined regular simultaneous + alternate trigger mode.
    value: 2
  - name: InjectedFastInterleaved
    description: Combined injected simultaneous + fast interleaved mode.
    value: 3
  - name: InjectedSlowInterleaved
    description: Combined injected simultaneous + slow interleaved mode.
    value: 4
  - name: Injected
    description: Injected simultaneous mode only.
    value: 5
  - name: Regular
    description: Regular simultaneous mode only.
    value: 6
  - name: FastInterleaved
    description: Fast interleaved mode only.
    value: 7
  - name: SlowInterleaved
    description: Slow interleaved mode only.
    value: 8
  - name: AlternateTrigger
    description: Alternate trigger mode only.
    value: 9
enum/EOC:
  bit_size: 1
  variants:
  - name: R_NotComplete_W_Clear
    description: Conversion is not complete.
    value: 0
  - name: Complete
    description: Conversion complete.
    value: 1
enum/EOCIE:
  bit_size: 1
  variants:
  - name: Disabled
    description: EOC interrupt disabled.
    value: 0
  - name: Enabled
    description: EOC interrupt enabled. An interrupt is generated when the EOC bit is set.
    value: 1
enum/EXTSEL:
  bit_size: 3
  variants:
  - name: Tim1Cc1
    description: Timer 1 CC1 event.
    value: 0
  - name: Tim1Cc2
    description: Timer 1 CC2 event.
    value: 1
  - name: Tim1Cc3
    description: Timer 1 CC3 event.
    value: 2
  - name: Tim2Cc2
    description: Timer 2 CC2 event.
    value: 3
  - name: Tim3Trgo
    description: Timer 3 TRGO event.
    value: 4
  - name: Tim4Cc4
    description: Timer 4 CC4 event.
    value: 5
  - name: Exti11
    description: EXTI line 11/TIM8_TRGO event (TIM8_TRGO is available only in high-density and XL-density devices).
    value: 6
  - name: Swstart
    description: SWSTART.
    value: 7
enum/EXTTRIG:
  bit_size: 1
  variants:
  - name: Disabled
    description: Conversion on external event disabled.
    value: 0
  - name: Enabled
    description: Conversion on external event enabled.
    value: 1
enum/JAUTO:
  bit_size: 1
  variants:
  - name: Disabled
    description: Automatic injected group conversion disabled.
    value: 0
  - name: Enabled
    description: Automatic injected group conversion enabled.
    value: 1
enum/JAWDEN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Analog watchdog disabled on injected channels.
    value: 0
  - name: Enabled
    description: Analog watchdog enabled on injected channels.
    value: 1
enum/JDISCEN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Discontinuous mode on injected channels disabled.
    value: 0
  - name: Enabled
    description: Discontinuous mode on injected channels enabled.
    value: 1
enum/JEOC:
  bit_size: 1
  variants:
  - name: R_NotComplete_W_Clear
    description: Conversion is not complete.
    value: 0
  - name: Complete
    description: Conversion complete.
    value: 1
enum/JEOCIE:
  bit_size: 1
  variants:
  - name: Disabled
    description: JEOC interrupt disabled.
    value: 0
  - name: Enabled
    description: JEOC interrupt enabled. An interrupt is generated when the JEOC bit is set.
    value: 1
enum/JEXTSEL:
  bit_size: 3
  variants:
  - name: Tim1Trgo
    description: Timer 1 TRGO event.
    value: 0
  - name: Tim1Cc4
    description: Timer 1 CC4 event.
    value: 1
  - name: Tim2Trgo
    description: Timer 2 TRGO event.
    value: 2
  - name: Tim2Cc1
    description: Timer 2 CC1 event.
    value: 3
  - name: Tim3Cc4
    description: Timer 3 CC4 event.
    value: 4
  - name: Tim4Trgo
    description: Timer 4 TRGO event.
    value: 5
  - name: Exti15
    description: EXTI line15/TIM8_CC4 event (TIM8_CC4 is available only in high-density and XL-density devices).
    value: 6
  - name: Jswstart
    description: JSWSTART.
    value: 7
enum/JEXTTRIG:
  bit_size: 1
  variants:
  - name: Disabled
    description: Conversion on external event disabled.
    value: 0
  - name: Enabled
    description: Conversion on external event enabled.
    value: 1
enum/JSTRT:
  bit_size: 1
  variants:
  - name: R_NotStarted_W_Clear
    description: No injected group conversion started.
    value: 0
  - name: Started
    description: Injected group conversion has started.
    value: 1
enum/JSWSTART:
  bit_size: 1
  variants:
  - name: Started
    description: Reset state.
    value: 0
  - name: R_NotStarted_W_Start
    description: Starting conversion of injected channels.
    value: 1
enum/RSTCAL:
  bit_size: 1
  variants:
  - name: Initialized
    description: Calibration register initialized.
    value: 0
  - name: R_NotInitialized_W_Initialize
    description: Initializing calibration register.
    value: 1
enum/SCAN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Scan mode disabled.
    value: 0
  - name: Enabled
    description: Scan mode enabled.
    value: 1
enum/SMP:
  bit_size: 3
  variants:
  - name: Cycles1_5
    description: 1.5 ADC clock cycles.
    value: 0
  - name: Cycles7_5
    description: 7.5 ADC clock cycles.
    value: 1
  - name: Cycles13_5
    description: 13.5 ADC clock cycles.
    value: 2
  - name: Cycles28_5
    description: 28.5 ADC clock cycles.
    value: 3
  - name: Cycles41_5
    description: 41.5 ADC clock cycles.
    value: 4
  - name: Cycles55_5
    description: 55.5 ADC clock cycles.
    value: 5
  - name: Cycles71_5
    description: 71.5 ADC clock cycles.
    value: 6
  - name: Cycles239_5
    description: 239.5 ADC clock cycles.
    value: 7
enum/STRT:
  bit_size: 1
  variants:
  - name: R_NotStarted_W_Clear
    description: No regular channel conversion started.
    value: 0
  - name: Started
    description: Regular channel conversion has started.
    value: 1
enum/SWSTART:
  bit_size: 1
  variants:
  - name: Started
    description: Reset state.
    value: 0
  - name: R_NotStarted_W_Start
    description: Starting conversion of regular channels.
    value: 1
enum/TSVREFE:
  bit_size: 1
  variants:
  - name: Disabled
    description: Temperature sensor and V_REFINT channel disabled.
    value: 0
  - name: Enabled
    description: Temperature sensor and V_REFINT channel enabled.
    value: 1