block/POWER:
  description: Power control.
  items:
  - name: TASKS_CONSTLAT
    description: Enable constant latency mode.
    byte_offset: 120
    access: Write
  - name: TASKS_LOWPWR
    description: Enable low power mode (variable latency).
    byte_offset: 124
    access: Write
  - name: EVENTS_POFWARN
    description: Power failure warning.
    byte_offset: 264
  - name: EVENTS_SLEEPENTER
    description: CPU entered WFI/WFE sleep.
    byte_offset: 276
  - name: EVENTS_SLEEPEXIT
    description: CPU exited WFI/WFE sleep.
    byte_offset: 280
  - name: INTENSET
    description: Enable interrupt.
    byte_offset: 772
    fieldset: INTENSET
  - name: INTENCLR
    description: Disable interrupt.
    byte_offset: 776
    fieldset: INTENCLR
  - name: RESETREAS
    description: Reset reason.
    byte_offset: 1024
    fieldset: RESETREAS
  - name: RAMSTATUS
    description: Deprecated register - RAM status register.
    byte_offset: 1064
    access: Read
    fieldset: RAMSTATUS
  - name: SYSTEMOFF
    description: System OFF register.
    byte_offset: 1280
    access: Write
    fieldset: SYSTEMOFF
  - name: POFCON
    description: Power failure comparator configuration.
    byte_offset: 1296
    fieldset: POFCON
  - name: GPREGRET
    description: General purpose retention register.
    byte_offset: 1308
    fieldset: GPREGRET
  - name: GPREGRET2
    description: General purpose retention register.
    byte_offset: 1312
    fieldset: GPREGRET2
  - name: RAMON
    description: Deprecated register - RAM on/off register (this register is retained).
    byte_offset: 1316
    fieldset: RAMON
  - name: RAMONB
    description: Deprecated register - RAM on/off register (this register is retained).
    byte_offset: 1364
    fieldset: RAMONB
  - name: DCDCEN
    description: DC/DC enable register.
    byte_offset: 1400
    fieldset: DCDCEN
  - name: RAM
    description: Unspecified.
    array:
      len: 8
      stride: 16
    byte_offset: 2304
    block: RAM
block/RAM:
  description: Unspecified.
  items:
  - name: POWER
    description: 'Description cluster[0]: RAM0 power control register.'
    byte_offset: 0
    fieldset: POWER
  - name: POWERSET
    description: 'Description cluster[0]: RAM0 power control set register.'
    byte_offset: 4
    access: Write
    fieldset: POWERSET
  - name: POWERCLR
    description: 'Description cluster[0]: RAM0 power control clear register.'
    byte_offset: 8
    access: Write
    fieldset: POWERCLR
fieldset/DCDCEN:
  description: DC/DC enable register.
  fields:
  - name: DCDCEN
    description: Enable or disable DC/DC converter.
    bit_offset: 0
    bit_size: 1
    enum: DCDCEN
fieldset/GPREGRET:
  description: General purpose retention register.
  fields:
  - name: GPREGRET
    description: General purpose retention register.
    bit_offset: 0
    bit_size: 8
fieldset/GPREGRET2:
  description: General purpose retention register.
  fields:
  - name: GPREGRET
    description: General purpose retention register.
    bit_offset: 0
    bit_size: 8
fieldset/INTENCLR:
  description: Disable interrupt.
  fields:
  - name: POFWARN
    description: Write '1' to Disable interrupt for POFWARN event.
    bit_offset: 2
    bit_size: 1
    enum: INTENCLR_POFWARN
  - name: SLEEPENTER
    description: Write '1' to Disable interrupt for SLEEPENTER event.
    bit_offset: 5
    bit_size: 1
    enum: INTENCLR_SLEEPENTER
  - name: SLEEPEXIT
    description: Write '1' to Disable interrupt for SLEEPEXIT event.
    bit_offset: 6
    bit_size: 1
    enum: INTENCLR_SLEEPEXIT
fieldset/INTENSET:
  description: Enable interrupt.
  fields:
  - name: POFWARN
    description: Write '1' to Enable interrupt for POFWARN event.
    bit_offset: 2
    bit_size: 1
    enum: INTENSET_POFWARN
  - name: SLEEPENTER
    description: Write '1' to Enable interrupt for SLEEPENTER event.
    bit_offset: 5
    bit_size: 1
    enum: INTENSET_SLEEPENTER
  - name: SLEEPEXIT
    description: Write '1' to Enable interrupt for SLEEPEXIT event.
    bit_offset: 6
    bit_size: 1
    enum: INTENSET_SLEEPEXIT
fieldset/POFCON:
  description: Power failure comparator configuration.
  fields:
  - name: POF
    description: Enable or disable power failure comparator.
    bit_offset: 0
    bit_size: 1
    enum: POF
  - name: THRESHOLD
    description: Power failure comparator threshold setting.
    bit_offset: 1
    bit_size: 4
    enum: THRESHOLD
fieldset/POWER:
  description: 'Description cluster[0]: RAM0 power control register.'
  fields:
  - name: S0POWER
    description: Keep RAM section S0 ON or OFF in System ON mode.
    bit_offset: 0
    bit_size: 1
    enum: POWER_S0POWER
  - name: S1POWER
    description: Keep RAM section S1 ON or OFF in System ON mode.
    bit_offset: 1
    bit_size: 1
    enum: POWER_S1POWER
  - name: S0RETENTION
    description: Keep retention on RAM section S0 when RAM section is in OFF.
    bit_offset: 16
    bit_size: 1
    enum: POWER_S0RETENTION
  - name: S1RETENTION
    description: Keep retention on RAM section S1 when RAM section is in OFF.
    bit_offset: 17
    bit_size: 1
    enum: POWER_S1RETENTION
fieldset/POWERCLR:
  description: 'Description cluster[0]: RAM0 power control clear register.'
  fields:
  - name: S0POWER
    description: Keep RAM section S0 of RAM0 on or off in System ON mode.
    bit_offset: 0
    bit_size: 1
    enum: POWERCLR_S0POWER
  - name: S1POWER
    description: Keep RAM section S1 of RAM0 on or off in System ON mode.
    bit_offset: 1
    bit_size: 1
    enum: POWERCLR_S1POWER
  - name: S0RETENTION
    description: Keep retention on RAM section S0 when RAM section is switched off.
    bit_offset: 16
    bit_size: 1
    enum: POWERCLR_S0RETENTION
  - name: S1RETENTION
    description: Keep retention on RAM section S1 when RAM section is switched off.
    bit_offset: 17
    bit_size: 1
    enum: POWERCLR_S1RETENTION
fieldset/POWERSET:
  description: 'Description cluster[0]: RAM0 power control set register.'
  fields:
  - name: S0POWER
    description: Keep RAM section S0 of RAM0 on or off in System ON mode.
    bit_offset: 0
    bit_size: 1
    enum: POWERSET_S0POWER
  - name: S1POWER
    description: Keep RAM section S1 of RAM0 on or off in System ON mode.
    bit_offset: 1
    bit_size: 1
    enum: POWERSET_S1POWER
  - name: S0RETENTION
    description: Keep retention on RAM section S0 when RAM section is switched off.
    bit_offset: 16
    bit_size: 1
    enum: POWERSET_S0RETENTION
  - name: S1RETENTION
    description: Keep retention on RAM section S1 when RAM section is switched off.
    bit_offset: 17
    bit_size: 1
    enum: POWERSET_S1RETENTION
fieldset/RAMON:
  description: Deprecated register - RAM on/off register (this register is retained).
  fields:
  - name: ONRAM0
    description: Keep RAM block 0 on or off in system ON Mode.
    bit_offset: 0
    bit_size: 1
    enum: ONRAM0
  - name: ONRAM1
    description: Keep RAM block 1 on or off in system ON Mode.
    bit_offset: 1
    bit_size: 1
    enum: ONRAM1
  - name: OFFRAM0
    description: Keep retention on RAM block 0 when RAM block is switched off.
    bit_offset: 16
    bit_size: 1
    enum: OFFRAM0
  - name: OFFRAM1
    description: Keep retention on RAM block 1 when RAM block is switched off.
    bit_offset: 17
    bit_size: 1
    enum: OFFRAM1
fieldset/RAMONB:
  description: Deprecated register - RAM on/off register (this register is retained).
  fields:
  - name: ONRAM2
    description: Keep RAM block 2 on or off in system ON Mode.
    bit_offset: 0
    bit_size: 1
    enum: ONRAM2
  - name: ONRAM3
    description: Keep RAM block 3 on or off in system ON Mode.
    bit_offset: 1
    bit_size: 1
    enum: ONRAM3
  - name: OFFRAM2
    description: Keep retention on RAM block 2 when RAM block is switched off.
    bit_offset: 16
    bit_size: 1
    enum: OFFRAM2
  - name: OFFRAM3
    description: Keep retention on RAM block 3 when RAM block is switched off.
    bit_offset: 17
    bit_size: 1
    enum: OFFRAM3
fieldset/RAMSTATUS:
  description: Deprecated register - RAM status register.
  fields:
  - name: RAMBLOCK0
    description: RAM block 0 is on or off/powering up.
    bit_offset: 0
    bit_size: 1
    enum: RAMBLOCK0
  - name: RAMBLOCK1
    description: RAM block 1 is on or off/powering up.
    bit_offset: 1
    bit_size: 1
    enum: RAMBLOCK1
  - name: RAMBLOCK2
    description: RAM block 2 is on or off/powering up.
    bit_offset: 2
    bit_size: 1
    enum: RAMBLOCK2
  - name: RAMBLOCK3
    description: RAM block 3 is on or off/powering up.
    bit_offset: 3
    bit_size: 1
    enum: RAMBLOCK3
fieldset/RESETREAS:
  description: Reset reason.
  fields:
  - name: RESETPIN
    description: Reset from pin-reset detected.
    bit_offset: 0
    bit_size: 1
    enum: RESETPIN
  - name: DOG
    description: Reset from watchdog detected.
    bit_offset: 1
    bit_size: 1
    enum: DOG
  - name: SREQ
    description: Reset from soft reset detected.
    bit_offset: 2
    bit_size: 1
    enum: SREQ
  - name: LOCKUP
    description: Reset from CPU lock-up detected.
    bit_offset: 3
    bit_size: 1
    enum: LOCKUP
  - name: OFF
    description: Reset due to wake up from System OFF mode when wakeup is triggered from DETECT signal from GPIO.
    bit_offset: 16
    bit_size: 1
    enum: OFF
  - name: LPCOMP
    description: Reset due to wake up from System OFF mode when wakeup is triggered from ANADETECT signal from LPCOMP.
    bit_offset: 17
    bit_size: 1
    enum: LPCOMP
  - name: DIF
    description: Reset due to wake up from System OFF mode when wakeup is triggered from entering into debug interface mode.
    bit_offset: 18
    bit_size: 1
    enum: DIF
  - name: NFC
    description: Reset due to wake up from System OFF mode by NFC field detect.
    bit_offset: 19
    bit_size: 1
    enum: NFC
fieldset/SYSTEMOFF:
  description: System OFF register.
  fields:
  - name: SYSTEMOFF
    description: Enable System OFF mode.
    bit_offset: 0
    bit_size: 1
    enum: SYSTEMOFF
enum/DCDCEN:
  bit_size: 1
  variants:
  - name: Disabled
    description: Disable.
    value: 0
  - name: Enabled
    description: Enable.
    value: 1
enum/DIF:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/DOG:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/INTENCLR_POFWARN:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Clear
    description: 'Read: Enabled.'
    value: 1
enum/INTENCLR_SLEEPENTER:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Clear
    description: 'Read: Enabled.'
    value: 1
enum/INTENCLR_SLEEPEXIT:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Clear
    description: 'Read: Enabled.'
    value: 1
enum/INTENSET_POFWARN:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Set
    description: 'Read: Enabled.'
    value: 1
enum/INTENSET_SLEEPENTER:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Set
    description: 'Read: Enabled.'
    value: 1
enum/INTENSET_SLEEPEXIT:
  bit_size: 1
  variants:
  - name: Disabled
    description: 'Read: Disabled.'
    value: 0
  - name: R_Enabled_W_Set
    description: 'Read: Enabled.'
    value: 1
enum/LOCKUP:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/LPCOMP:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/NFC:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/OFF:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/OFFRAM0:
  bit_size: 1
  variants:
  - name: RAM0Off
    description: Off.
    value: 0
  - name: RAM0On
    description: On.
    value: 1
enum/OFFRAM1:
  bit_size: 1
  variants:
  - name: RAM1Off
    description: Off.
    value: 0
  - name: RAM1On
    description: On.
    value: 1
enum/OFFRAM2:
  bit_size: 1
  variants:
  - name: RAM2Off
    description: Off.
    value: 0
  - name: RAM2On
    description: On.
    value: 1
enum/OFFRAM3:
  bit_size: 1
  variants:
  - name: RAM3Off
    description: Off.
    value: 0
  - name: RAM3On
    description: On.
    value: 1
enum/ONRAM0:
  bit_size: 1
  variants:
  - name: RAM0Off
    description: Off.
    value: 0
  - name: RAM0On
    description: On.
    value: 1
enum/ONRAM1:
  bit_size: 1
  variants:
  - name: RAM1Off
    description: Off.
    value: 0
  - name: RAM1On
    description: On.
    value: 1
enum/ONRAM2:
  bit_size: 1
  variants:
  - name: RAM2Off
    description: Off.
    value: 0
  - name: RAM2On
    description: On.
    value: 1
enum/ONRAM3:
  bit_size: 1
  variants:
  - name: RAM3Off
    description: Off.
    value: 0
  - name: RAM3On
    description: On.
    value: 1
enum/POF:
  bit_size: 1
  variants:
  - name: Disabled
    description: Disable.
    value: 0
  - name: Enabled
    description: Enable.
    value: 1
enum/POWERCLR_S0POWER:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 1
enum/POWERCLR_S0RETENTION:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 1
enum/POWERCLR_S1POWER:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 1
enum/POWERCLR_S1RETENTION:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 1
enum/POWERSET_S0POWER:
  bit_size: 1
  variants:
  - name: On
    description: On.
    value: 1
enum/POWERSET_S0RETENTION:
  bit_size: 1
  variants:
  - name: On
    description: On.
    value: 1
enum/POWERSET_S1POWER:
  bit_size: 1
  variants:
  - name: On
    description: On.
    value: 1
enum/POWERSET_S1RETENTION:
  bit_size: 1
  variants:
  - name: On
    description: On.
    value: 1
enum/POWER_S0POWER:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/POWER_S0RETENTION:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/POWER_S1POWER:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/POWER_S1RETENTION:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/RAMBLOCK0:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/RAMBLOCK1:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/RAMBLOCK2:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/RAMBLOCK3:
  bit_size: 1
  variants:
  - name: Off
    description: Off.
    value: 0
  - name: On
    description: On.
    value: 1
enum/RESETPIN:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/SREQ:
  bit_size: 1
  variants:
  - name: NotDetected
    description: Not detected.
    value: 0
  - name: Detected
    description: Detected.
    value: 1
enum/SYSTEMOFF:
  bit_size: 1
  variants:
  - name: Enter
    description: Enable System OFF mode.
    value: 1
enum/THRESHOLD:
  bit_size: 4
  variants:
  - name: V17
    description: Set threshold to 1.7 V.
    value: 4
  - name: V18
    description: Set threshold to 1.8 V.
    value: 5
  - name: V19
    description: Set threshold to 1.9 V.
    value: 6
  - name: V20
    description: Set threshold to 2.0 V.
    value: 7
  - name: V21
    description: Set threshold to 2.1 V.
    value: 8
  - name: V22
    description: Set threshold to 2.2 V.
    value: 9
  - name: V23
    description: Set threshold to 2.3 V.
    value: 10
  - name: V24
    description: Set threshold to 2.4 V.
    value: 11
  - name: V25
    description: Set threshold to 2.5 V.
    value: 12
  - name: V26
    description: Set threshold to 2.6 V.
    value: 13
  - name: V27
    description: Set threshold to 2.7 V.
    value: 14
  - name: V28
    description: Set threshold to 2.8 V.
    value: 15